Fluke 28 II Rugged Digital Multimeter

The Fluke 28II Rugged Industrial Multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The 28II meter has an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15-Degree C to +55-Degree C (5-Degree F to 131-Degree F, -40-Degree C for up to 20 minutes) and 95-Percent humidity, and have been designed and tested to withstand a 3 m (10 ft.) drop. The Fluke 28II multimeter is built to work in the toughest environments. Measures up to 1000 V ac and dc, measures up to 10 A (20 A for 30 seconds), has a 10,000 μF capacitance range and a frequency to 200 kHz. Features an extended ac voltage bandwidth of 15 Hz to 20 kHz. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. The multimeter is designed to perform resistance, continuity and diode tests and has a min/max and average recording to capture variations automatically. Features a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. The 28II’s hi resolution 20,000 count display mode allows for more accuracy. Backlit keypad buttons allow for easy visibility in lowlit areas while large display digits and 2 level bright white backlight increase visibility. Temperature: -200°C to +1090°C

                                                 

Fluke 28 II Rugged Digital Multimeter

The standard for rugged

The Fluke 28 II digital multimeters define the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15°C to +55°C (5°F to 131°F, -40°C for up to 20 minutes) and 95% humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.

 

---

Product details

Style:Standard

· Is Discontinued By Manufacturer : No

· Product Dimensions : 4.45 x 1.34 x 2.44 inches; 2.72 Pounds

· Item model number : FLUKE-28II

· National Stock Number : 6625-01-608-1940

· Batteries : 3 AA batteries required. (included)

· Date First Available : November 19, 2003

· Manufacturer : Fluke Corporation

· ASIN : B002X9ISWI

· Measure up to 1000 V AC and DC

· Measure up to 10 A (20 A for 30 seconds)

· 10,000 μF capacitance range

· Frequency to 200 kHz

· Extended AC voltage bandwidth– 15 Hz to 20 kHz

· Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument

· Resistance, continuity and diode test

· Min/Max and average recording to capture variations automatically

· Hi resolution 20,000 count display mode

· True-rms AC Voltage and current for accurate measurements on Non linear signals

· Backlit keypad buttons allow for easy visibility in low-lit areas

· IP 67 waterproof and dustproof protection, completely sealed for use in harsh environments

· Designed to withstand 3 meter drop (with holster)

· Hi resolution 20,000 count display mode

· True-rms ac voltage and current for accurate measurements on non linear signals

· Backlit keypad buttons allow for easy visibility in lowlit areas

---

Product Specifications

Ean	0095969461719 , 0013227006816
Global Trade Identification Number	00095969461719
Included Components	TRMS MULTIMETER
Item Weight	2.72 pounds
Manufacturer Series Number	3301271
Model Number	FLUKE-28II
National Stock Number	6625-01-608-1940
Number of Items	1
Part Number	3301271
Power Source Type	Corded-electric
Style	Standard
UNSPSC Code	41110000
UPC	095969461719 , 013227006816
Warranty Description	Limited lifetime warranty

See less

Specification for this product family

Brand Name	Fluke
UNSPSC Code	41113630

 

 

 

Fluke 113 True-RMS Utility Multimeter

The Fluke 113 True-RMS Utility Multimeter is a digital multimeter (also known as a multitester) that measures AC/DC voltage to 600V, resistance to 60 kiloohms, and capacitance to 9,999 microfarads. The meter has a diode check for testing general-purpose germanium, silicon, and power diodes, and a continuity beeper which provides audible detection of resistance by turning on at less than 25 ohms and off at 250 ohms. It is also able to simultaneously check for voltage and continuity. This true RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform and has both manual- and auto-ranging capabilities for user flexibility. A Max/Min function records signal fluctuations and a hold function freezes measurements on the display. The 6000-count resolution, 3-1/2 digit digital display is backlit for readability in low-light conditions. The meter is safety rated for Category III to 600V and Category IV to 300V. It uses a 9V battery (installed) with a battery life of approximately 300 hours without backlight and has a sleep mode to maximize battery life. The meter measures 6.58 x 3.35 x 1.81 inches (H x W x D) and weighs 13 oz./404 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This meter includes a holster with built-in probe holders for convenient storage. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications.

---

Product details

Style:Standard

· Is Discontinued By Manufacturer : No

· Product Dimensions : 6.57 x 3.31 x 1.81 inches; 1.21 Pounds

· Item model number : FLUKE-113

· National Stock Number : 6625-01-579-8918

· Batteries : 1 Lithium ion batteries required. (included)

· Date First Available : November 19, 2003

· Manufacturer : Fluke Corporation

· ASIN : B004Q05ODI

Fluke 113 Digital Multimeter

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.

· Digital multimeter measures AC/DC voltage, resistance, and capacitance and performs continuity and diode tests

· True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform

· Simultaneously checks for voltage and continuity

· Manual and auto ranging modes for user flexibility

· Safety rated for Category III to 600Volts and Category IV to 300 Volts

---

Product Specifications

Color	Yellow
Ean	5060136400827 , 0095969434522 , 5999675535076 , 0095969525589 , 0642008666859 , 5053252429872 , 0095969436298 , 5053184523792 , 0095969467704 , 2050002775312 , 0013584068465 , 0013584068502 , 0715933110978 , 3615960097389
Global Trade Identification Number	00095969436298
Height	6-37/64 inches
Included Components	UTILITY MULTIMETER
Item Depth	1-103/128 inches
Item Weight	1.21 pounds
Manufacturer Series Number	3078875
Material	Plastic
Model Number	FLUKE-113
National Stock Number	6625-01-579-8918
Number of Items	1
Part Number	3078875
Style	Standard
UNSPSC Code	41110000
UPC	013584068465 , 715933110978 , 642008666859 , 095969467704 , 095969434522 , 013584068502 , 095969525589 , 095969436298
Voltage	9 volts
Width	3-11/32 inches

Specification for this product family

Brand Name	Fluke
Model Number	fluke 113
Part Number	2538790
UNSPSC Code	31000000